Skip to main content
TireShopper

285/40ZR20 vs P235/70R16 tire size comparison

P235/70R16 is 1 mm (0.08%) shorter than 285/40ZR20 and 1.9 in narrower. They fit different wheels: 285/40ZR20 a 20-inch wheel and P235/70R16 a 16-inch wheel.

285/40ZR20 and P235/70R16 side by side

0.0 in / -0.08%285/40ZR20: 29.0 in tall, solid lineP235/70R16: 29.0 in tall, dashed line285/40ZR20Width 11.2 in (285 mm)Sidewall 4.5 in (114 mm)P235/70R16Width 9.3 in (235 mm)Sidewall 6.5 in (165 mm)
285/40ZR20 is drawn with a solid line and P235/70R16 with a dashed line. In each drawing both tires are to the same scale; the tread shoulder and bead curves are simplified. The table below has the same numbers.
Dimensions of 285/40ZR20 and P235/70R16, with the difference (P235/70R16 minus 285/40ZR20)
Measurement285/40ZR20P235/70R16DifferenceDifference %
Section width11.2 in (285 mm)9.3 in (235 mm)-1.9 in (-50 mm)-17.54%
Sidewall height4.5 in (114 mm)6.5 in (165 mm)+2.0 in (+51 mm)+44.30%
Wheel (rim) diameter20.0 in (508 mm)16.0 in (406 mm)-4.0 in (-102 mm)-20.00%
Overall diameter29.0 in (736 mm)29.0 in (735 mm)0.0 in (-1 mm)-0.08%
Circumference91.0 in (2312 mm)91.0 in (2310 mm)0.0 in (-2 mm)-0.08%
Revolutions per mile696697+1+0.08%

Differences are P235/70R16 minus 285/40ZR20; percentages are relative to 285/40ZR20. These are nominal design dimensions. Real tires vary by brand, tread depth, wheel width, load and pressure.

The overall diameter differs by 0.08%, which is within the common 3% rule of thumb.

The rule of thumb keeps a replacement size within about 3% of the original overall diameter. It covers diameter only. It is not a fit, load or safety check, because width, wheel diameter, load capacity and clearance matter too. Confirm any size change with your vehicle's owner's manual or a tire professional.

Speedometer difference

When the speedometer reads 60 mph on a vehicle built for 285/40ZR20, the actual speed on P235/70R16 is about 60.0 mph. When it reads 60 mph on a vehicle built for P235/70R16, the actual speed on 285/40ZR20 is about 60.0 mph. These figures assume the speedometer is accurate on the original size and use nominal dimensions, so treat them as estimates.

Actual speed for a given speedometer reading, 285/40ZR20 against P235/70R16
Speedometer readsActual on P235/70R16 (built for 285/40ZR20)Actual on 285/40ZR20 (built for P235/70R16)
20 mph20.0 mph20.0 mph
30 mph30.0 mph30.0 mph
40 mph40.0 mph40.0 mph
50 mph50.0 mph50.0 mph
60 mph60.0 mph60.0 mph
70 mph69.9 mph70.1 mph
80 mph79.9 mph80.1 mph

A common rule of thumb is to keep a replacement size within about 3% of the original overall diameter. Check the tire placard on the driver's door jamb and your owner's manual for the sizes your vehicle was built for. Confirm any size change with your vehicle's owner's manual or a tire professional.

Which vehicles use each size?

These vehicles list the size among their verified sizes, by trim. Open one to see all of its sizes.

Check it in the calculator

The calculator takes the same two sizes and shows the full comparison, or lets you swap either one for another size.

Open this comparison in the calculator

Shop for 285/40ZR20 or P235/70R16 tires

Confirm the size on your tire sidewall or door placard first. These links open each store's own search; prices and stock are on their sites.

We may earn a commission if you buy through these links. It doesn't change the price you pay. Read our affiliate disclosure.

Other comparisons with 285/40ZR20

Side-by-side dimensions and speedometer difference for sizes close to 285/40ZR20 in overall diameter.

Other comparisons with P235/70R16

Side-by-side dimensions and speedometer difference for sizes close to P235/70R16 in overall diameter.

You might also need

Paid links to Amazon search results. As an Amazon Associate I earn from qualifying purchases. Read our affiliate disclosure.