Skip to main content
TireShopper

325/65R18 vs LT275/50R24 tire size comparison

LT275/50R24 is 0.2 in (0.56%) taller than 325/65R18 and 2.0 in narrower. They fit different wheels: 325/65R18 an 18-inch wheel and LT275/50R24 a 24-inch wheel.

325/65R18 and LT275/50R24 side by side

+0.2 in / +0.56%325/65R18: 34.6 in tall, solid lineLT275/50R24: 34.8 in tall, dashed line325/65R18Width 12.8 in (325 mm)Sidewall 8.3 in (211 mm)LT275/50R24Width 10.8 in (275 mm)Sidewall 5.4 in (138 mm)
325/65R18 is drawn with a solid line and LT275/50R24 with a dashed line. In each drawing both tires are to the same scale; the tread shoulder and bead curves are simplified. The table below has the same numbers.
Dimensions of 325/65R18 and LT275/50R24, with the difference (LT275/50R24 minus 325/65R18)
Measurement325/65R18LT275/50R24DifferenceDifference %
Section width12.8 in (325 mm)10.8 in (275 mm)-2.0 in (-50 mm)-15.38%
Sidewall height8.3 in (211 mm)5.4 in (138 mm)-2.9 in (-73 mm)-34.91%
Wheel (rim) diameter18.0 in (457 mm)24.0 in (610 mm)+6.0 in (+153 mm)+33.33%
Overall diameter34.6 in (880 mm)34.8 in (885 mm)+0.2 in (+5 mm)+0.56%
Circumference108.8 in (2764 mm)109.4 in (2779 mm)+0.6 in (+15 mm)+0.56%
Revolutions per mile582579-3-0.55%

Differences are LT275/50R24 minus 325/65R18; percentages are relative to 325/65R18. These are nominal design dimensions. Real tires vary by brand, tread depth, wheel width, load and pressure.

The overall diameter differs by 0.56%, which is within the common 3% rule of thumb.

The rule of thumb keeps a replacement size within about 3% of the original overall diameter. It covers diameter only. It is not a fit, load or safety check, because width, wheel diameter, load capacity and clearance matter too. Confirm any size change with your vehicle's owner's manual or a tire professional.

Speedometer difference

When the speedometer reads 60 mph on a vehicle built for 325/65R18, the actual speed on LT275/50R24 is about 60.3 mph. When it reads 60 mph on a vehicle built for LT275/50R24, the actual speed on 325/65R18 is about 59.7 mph. These figures assume the speedometer is accurate on the original size and use nominal dimensions, so treat them as estimates.

Actual speed for a given speedometer reading, 325/65R18 against LT275/50R24
Speedometer readsActual on LT275/50R24 (built for 325/65R18)Actual on 325/65R18 (built for LT275/50R24)
20 mph20.1 mph19.9 mph
30 mph30.2 mph29.8 mph
40 mph40.2 mph39.8 mph
50 mph50.3 mph49.7 mph
60 mph60.3 mph59.7 mph
70 mph70.4 mph69.6 mph
80 mph80.4 mph79.6 mph

A common rule of thumb is to keep a replacement size within about 3% of the original overall diameter. Check the tire placard on the driver's door jamb and your owner's manual for the sizes your vehicle was built for. Confirm any size change with your vehicle's owner's manual or a tire professional.

Which vehicles use each size?

These vehicles list the size among their verified sizes, by trim. Open one to see all of its sizes.

Check it in the calculator

The calculator takes the same two sizes and shows the full comparison, or lets you swap either one for another size.

Open this comparison in the calculator

Shop for 325/65R18 or LT275/50R24 tires

Confirm the size on your tire sidewall or door placard first. These links open each store's own search; prices and stock are on their sites.

We may earn a commission if you buy through these links. It doesn't change the price you pay. Read our affiliate disclosure.

Other comparisons with 325/65R18

Side-by-side dimensions and speedometer difference for sizes close to 325/65R18 in overall diameter.

Other comparisons with LT275/50R24

Side-by-side dimensions and speedometer difference for sizes close to LT275/50R24 in overall diameter.

You might also need

Paid links to Amazon search results. As an Amazon Associate I earn from qualifying purchases. Read our affiliate disclosure.